An air duct can be described as a hollow mechanism found in buildings that are used to relay air into a building. The air vent or ventilation shaft is the other name used to refer to an air duct. In this life, there is no organism that can exist in the absence of clean air.
Humans being living organisms also need fresh air so that they can be able to survive. Because of this, there is need for better ways to be devised that allow air quality within buildings to be improved time and again. The ventilation shaft present in most of our homes are one of the accomplishments achieved in helping maintain good air quality within our surroundings.
The Essential Laws of Cleaning Explained
Air holes actually act as sieves as they bring in cold fires air and expel dump and stuffy hot air. As air is delivered to a room through the duct, it carries with it dust particles, elements which if not removed in a timely manner might cause the inhabitants of a given space much harm.
For this reason, it is imperative that the air duct is cleaned up once in a while. Cleaning of an air duct is not rocket science. Tools required to facilitate this exercise include a vacuum cleaner, a couple of paper towels, screwdriver, toilet brush and a new furnace filter. Before any cleaning can proceed, all openings that provide heated air are first covered using the paper towels. This is very necessary since it ensures that dust does not enter the room during cleaning.
Secondly, it is always important to turn on the fan before and during air duct cleaning. As one cleans, the big dust particles break into smaller units. The fan then propels them outwards thus making one’s work easier.
For greater efficiency, one is expected to clean the air duct without replacing the furnace filter first. This can be attributed to the fact that the filter helps trap dust particles during cleaning so that they cannot affect the functioning of the fan. It is for this reason that air duct cleaning is only done in the presence of the old filter.
When it comes to cleaning a ventilation shaft, no stone should be left unturned. This is to say that the individual cleaning should ensure that he has carefully cleaned all spaces within the shaft that might have a build up of dust in them. This includes the air registers which might also harbor some dust in them. As the fan propagates the dust particles out of the vent, the vacuum cleaner sucks them. The result is a spotless system.
Over time, the furnace filter gets worn out. Because of this, the filter is not able to trap all the dust particles present in the air. Hence it is always important that the old unit is replaced with a new one whenever a cleaning exercise is being conducted.